Epson L3118 Waste Ink Counter Reset

The Epson L3118 is a widely used Epson printer. Like many Epson devices, it can stop printing when the internal waste ink counter reaches its predefined limit.

The Epson L3118 tracks waste ink with an internal counter. Because it is an estimate (not a physical sensor), it may trigger before the pads are actually full.

Understanding the Epson L3118 Waste Ink Counter

A service visit is often unnecessary. Wic Reset Connect allows a safe Epson L3118 waste counter reset in minutes.

Typical Signs

• Printer refuses to print even with ink available
• Epson Status Monitor shows maintenance warning
• Blinking lights and blocked jobs
• Device is locked until reset is performed

Three Steps to Restore Epson L3118 Printing

1. Стъпка 1: Connect Epson L3118 to a Windows computer with a stable Internet connection using a USB cable.
2. Стъпка 2: Start Wic Reset Connect in Administrator mode and wait until Epson L3118 appears in the device list.
3. Стъпка 3: Paste the reset key, click Reset, and after completion power-cycle Epson L3118.

Most Epson L3118 waste counter resets finish in ~1–2 minutes.

System Requirements

• Stable Internet connection during reset
• USB connection required (Wi-Fi reset not supported)
• Valid Wic Reset Connect reset key
• Windows 7/8/10/11 PC

If the Printer Is Not Detected

• Use a direct USB connection (avoid hubs).
• Temporarily disable VPN/proxy if validation fails.
• Close Epson Status Monitor or other printer utilities.
• Run the app as Administrator.
• Try another USB cable (some cables are charge-only).

Frequently Asked Questions