特定型号重置指南
Epson L3118 Reset Waste Ink Counter
A waste ink counter warning can prevent Epson L3118 from printing even when the printer is otherwise working normally. Follow the checks and reset sequence below to restore operation safely.
Why Epson L3118 stops printing
An ink pad message is a maintenance safeguard. It indicates that Epson L3118 has reached a stored waste ink value that must be reset before normal printing can resume.
Wic Reset Connect 旨在重置兼容的计数器 Epson L3118. 。必要时仍应检查并维护实体废墨系统。.
Reset the counter in Epson L3118
先完成以下连接检查，然后运行重置程序；在此过程中不要打开其他打印机程序。.
-
安装原始驱动程序
Install the official Epson driver for L3118 and confirm that Windows can see the printer.
-
通过 USB 直接连接
Connect Epson L3118 to the computer without Wi-Fi, a hub or an adapter.
-
启动 Wic Reset Connect
Close Epson Status Monitor, run Wic Reset Connect as Administrator and select Epson L3118.
-
输入密钥并重置
输入已购买的密钥，选择“重置”，并保持打印机连接状态，直到操作完成。.
If Epson L3118 is not detected
- Install the original Epson driver for L3118; a generic Windows driver may not expose the required communication interface.
- 开始前，请关闭 Epson 状态监视器以及任何其他 Epson 维护软件，以便进行 Wic Reset Connect。.
- 如果未检测到打印机，请尝试其他 USB 端口和已知支持数据传输的 USB 线缆。.
- 清除暂停的打印任务；如果其他程序占用了 USB 连接，请同时重新启动打印机和 Windows。.
Epson L3118 reset FAQ
如果第一次重置尝试失败怎么办？
请先解决驱动程序或 USB 通信问题。如果密钥已被使用，请使用新密钥生成器或联系支持人员。.
Does Epson L3118 need service mode?
不需要。Epson 打印机不使用 Canon 服务模式操作顺序。通过 USB 正常连接打印机即可。.
Can I reset Epson L3118 over Wi-Fi?
不能。Wic Reset Connect 需要通过 USB 直接连接到 Windows 计算机。.