دليل إعادة الضبط الخاص بالطراز

Epson PX-401A إعادة تعيين عداد الحبر المستعمل Epson PX-401A

Epson PX-401A may refuse new print jobs after estimating that the waste ink pads have reached their service limit. Wic Reset Connect can reset the software counter after the printer is prepared correctly.

مفتاح إعادة الضبط$8,00
التسليم الفوري عبر البريد الإلكترونييشمل الدعم الفني ما يلي:مفتاح بديل بعد فشل إعادة الضبط
المشكلة

The counter behind the Epson PX-401A warning

Epson PX-401A uses stored counter data to estimate absorber usage. The estimate may reach its limit before the pads appear completely saturated, but physical maintenance should still be considered.

صُمم Wic Reset Connect لإعادة ضبط العداد المتوافق في Epson PX-401A. يجب مع ذلك فحص نظام الحبر المهدور الفعلي وصيانته عند الضرورة.

Windows 7–11كمبيوتر شخصي أو محمول
USB مباشربدون Wi-Fi أو موزّع
الإنترنتللتحقق من المفتاح
مفتاح إعادة الضبطلهذه العملية
خطوة بخطوة

Reset the counter in Epson PX-401A

استخدم التسلسل أدناه لإنشاء اتصال USB مستقر ومسح عداد الحبر المتبقي.

  1. ثبّت برنامج التشغيل الأصلي

    Install the official Epson driver for PX-401A and confirm that Windows can see the printer.

  2. الاتصال مباشرةً عبر USB

    Connect Epson PX-401A to the computer without Wi-Fi, a hub or an adapter.

  3. ابدأ تشغيل Wic Reset Connect

    Close Epson Status Monitor, run Wic Reset Connect as Administrator and select Epson PX-401A.

  4. أدخل المفتاح وأعد ضبط العداد

    أدخل المفتاح الذي تم شراؤه، واختر Reset، وأبقِ الطابعة متصلة حتى اكتمال العملية.

أكمل بشكل صحيح: When the success message appears, restart Epson PX-401A. Allow Windows to detect the printer again before sending a test page.
If Epson PX-401A is not detected
  • جرّب منفذ USB آخر وكابل USB معروفًا بقدرته على نقل البيانات إذا لم يتم اكتشاف الطابعة.
  • Install the original Epson driver for PX-401A; a generic Windows driver may not expose the required communication interface.
  • أغلق مراقب الحالة Epson وأي برنامج صيانة آخر من Epson قبل بدء Wic Reset Connect.
  • امسح مهام الطباعة المتوقفة مؤقتًا وأعد تشغيل الطابعة وWindows إذا كان برنامج آخر يحتفظ باتصال USB.

فتح التعليمات الكاملة

الأسئلة الشائعة

Epson PX-401A reset FAQ

كم تستغرق إعادة الضبط؟

تكتمل إعادة الضبط نفسها عادةً خلال نحو 1–2 دقيقة بعد اكتشاف الطابعة بشكل صحيح.

Does Epson PX-401A need service mode?

لا. لا تستخدم طابعات Epson تسلسل وضع الخدمة Canon. صِل الطابعة بشكل طبيعي عبر USB.

هل تؤدي إعادة الضبط إلى تنظيف وسادات الحبر أو استبدالها؟

لا. فهي تغيّر قيمة العداد المخزّنة. افحص نظام الحبر المهدَر الفعلي ونظّفه أو استبدله عندما تتطلب حالته ذلك.

أعد الضبط بثقة

Restore Epson PX-401A

A direct USB connection, the correct driver and a valid key are all you need to reset Epson PX-401A.

مفتاح إعادة الضبط: $8,00
Shopping Cart
اختر عملتك