دليل إعادة الضبط الخاص بالطراز

Epson PX-1600F Reset Waste Ink Counter

If your Epson PX-1600F has stopped with an ink pad or service-life warning, the printer may have reached its waste ink counter limit. This model-specific guide explains what the message means and how to complete the reset with Wic Reset Connect.

مفتاح إعادة الضبط$8,00
التسليم الفوري عبر البريد الإلكترونييشمل الدعم الفني ما يلي:مفتاح بديل بعد فشل إعادة الضبط
المشكلة

Why the ink pad counter blocks Epson PX-1600F

An ink pad message is a maintenance safeguard. It indicates that Epson PX-1600F has reached a stored waste ink value that must be reset before normal printing can resume.

صُمم Wic Reset Connect لإعادة ضبط العداد المتوافق في Epson PX-1600F. يجب مع ذلك فحص نظام الحبر المهدور الفعلي وصيانته عند الضرورة.

Windows 7–11كمبيوتر شخصي أو محمول
USB مباشربدون Wi-Fi أو موزّع
الإنترنتللتحقق من المفتاح
مفتاح إعادة الضبطلهذه العملية
خطوة بخطوة

Reset the counter in Epson PX-1600F

تحمي الاستعدادات الصحيحة مفتاح إعادة الضبط من استخدامه أثناء محاولة اتصال فاشلة. تحقّق من كل متطلب قبل اختيار «إعادة الضبط».

  1. ثبّت برنامج التشغيل الأصلي

    Install the official Epson driver for PX-1600F and confirm that Windows can see the printer.

  2. الاتصال مباشرةً عبر USB

    Connect Epson PX-1600F to the computer without Wi-Fi, a hub or an adapter.

  3. ابدأ تشغيل Wic Reset Connect

    Close Epson Status Monitor, run Wic Reset Connect as Administrator and select Epson PX-1600F.

  4. أدخل المفتاح وأعد ضبط العداد

    أدخل المفتاح الذي تم شراؤه، واختر Reset، وأبقِ الطابعة متصلة حتى اكتمال العملية.

أكمل بشكل صحيح: When the success message appears, restart Epson PX-1600F. Allow Windows to detect the printer again before sending a test page.
If Epson PX-1600F is not detected
  • Install the original Epson driver for PX-1600F; a generic Windows driver may not expose the required communication interface.
  • شغّل Wic Reset Connect كمسؤول وحافظ على اتصال الإنترنت نشطًا طوال عملية التحقق.
  • امسح مهام الطباعة المتوقفة مؤقتًا وأعد تشغيل الطابعة وWindows إذا كان برنامج آخر يحتفظ باتصال USB.
  • أغلق مراقب الحالة Epson وأي برنامج صيانة آخر من Epson قبل بدء Wic Reset Connect.

فتح التعليمات الكاملة

الأسئلة الشائعة

Epson PX-1600F reset FAQ

كم تستغرق إعادة الضبط؟

تكتمل إعادة الضبط نفسها عادةً خلال نحو 1–2 دقيقة بعد اكتشاف الطابعة بشكل صحيح.

هل تؤدي إعادة الضبط إلى تنظيف وسادات الحبر أو استبدالها؟

لا. فهي تغيّر قيمة العداد المخزّنة. افحص نظام الحبر المهدَر الفعلي ونظّفه أو استبدله عندما تتطلب حالته ذلك.

Does Epson PX-1600F need service mode?

لا. لا تستخدم طابعات Epson تسلسل وضع الخدمة Canon. صِل الطابعة بشكل طبيعي عبر USB.

أعد الضبط بثقة

Restore Epson PX-1600F

A direct USB connection, the correct driver and a valid key are all you need to reset Epson PX-1600F.

مفتاح إعادة الضبط: $8,00
Shopping Cart
اختر عملتك