Epson Photo 1410 Ink Pad Counter Reset Guide

Epson Photo 1410 Waste Ink Counter Reset

When the Epson Photo 1410 reaches its maintenance threshold, Epson firmware may block printing as a safeguard. In most cases, this is resolved with a counter reset.

A waste ink counter in the Epson Photo 1410 accumulates after cleaning operations. Once it reaches a limit, printing is stopped to prevent overflow.

Understanding the Epson Photo 1410 Waste Ink Counter

With Wic Reset Connect, you can reset the Epson Photo 1410 waste ink counter quickly using a Windows PC, USB connection, and a valid reset key.

How the Error Appears

  • Printer refuses to print even with ink available
  • Epson Status Monitor shows maintenance warning
  • Blinking lights and blocked jobs
  • Device is locked until reset is performed

Three Steps to Restore Epson Photo 1410 Printing

  1. Step 1: Connect Epson Photo 1410 to a Windows computer with a stable Internet connection using a USB cable.
  2. Step 2: Run Wic Reset Connect as Administrator and confirm Epson Photo 1410 is detected.
  3. Step 3: Paste the reset key, click Reset, and after completion power-cycle Epson Photo 1410.
Buy Reset Key ⬇️ Download Wic Reset Connect التعليمات

Most Epson Photo 1410 waste counter resets finish in ~1–2 minutes.

Before You Begin

  • Windows 7/8/10/11 PC
  • Stable Internet connection during reset
  • Valid Wic Reset Connect reset key
  • USB connection required (Wi-Fi reset not supported)

Frequently Asked Questions

What if reset doesn’t work?
Check USB cable/port, run as admin, and close other printer utilities.
How long does it take?
Usually about 1–2 minutes.
Do I need a service center?
Typically not for a waste ink counter lock; a reset is usually sufficient.
Can I reset over Wi-Fi?
No. The reset requires a USB connection to a Windows PC.

Guide prepared for Epson Photo 1410 – Waste Ink Counter Reset using Wic Reset Connect.

عربة التسوق