Reset Epson ME-700FW Waste Ink Counter in Minutes

Epson ME-700FW Waste Ink Counter Reset

If your Epson ME-700FW suddenly refuses to print and shows a maintenance warning, it is often caused by the waste ink (ink pad) counter threshold.

During head cleaning and maintenance cycles, excess ink is routed to internal absorber pads. The Epson ME-700FW uses a software counter to estimate pad saturation and locks printing at a set threshold.

Why the Epson ME-700FW Stops Printing (Waste Counter Limit)

With Wic Reset Connect, you can reset the Epson ME-700FW waste ink counter quickly using a Windows PC, USB connection, and a valid reset key.

Common Symptoms

  • ‘Service Required’ / service life message in driver or utility
  • Maintenance/support code (varies by model/driver)
  • Printing stops after cleaning cycles
  • Warning repeats after restarting the printer

Step-by-Step: Epson ME-700FW Waste Counter Reset

  1. Step 1: Use a Windows PC (7–11) with Internet access. Connect Epson ME-700FW via USB (Wi-Fi reset is not supported).
  2. Step 2: Run Wic Reset Connect as Administrator and confirm Epson ME-700FW is detected.
  3. Step 3: Enter your reset key and press Reset. Wait ~1–2 minutes, then restart Epson ME-700FW.
Buy Reset Key ⬇️ Download Wic Reset Connect التعليمات

Most Epson ME-700FW waste counter resets finish in ~1–2 minutes.

Frequently Asked Questions

Do I need a service center?
Typically not for a waste ink counter lock; a reset is usually sufficient.
Can I reset over Wi-Fi?
No. The reset requires a USB connection to a Windows PC.
What if reset doesn’t work?
Check USB cable/port, run as admin, and close other printer utilities.
How long does it take?
Usually about 1–2 minutes.

Guide prepared for Epson ME-700FW – Waste Ink Counter Reset using Wic Reset Connect.

عربة التسوق