دليل إعادة الضبط الخاص بالطراز

Epson ET-2821 Reset Waste Ink Counter

When Epson ET-2821 reports that an ink pad needs service, restarting the printer alone normally does not clear the lock. A compatible reset procedure is required.

مفتاح إعادة الضبط$8,00
التسليم الفوري عبر البريد الإلكترونييشمل الدعم الفني ما يلي:مفتاح بديل بعد فشل إعادة الضبط
المشكلة

The counter behind the Epson ET-2821 warning

Epson ET-2821 uses stored counter data to estimate absorber usage. The estimate may reach its limit before the pads appear completely saturated, but physical maintenance should still be considered.

صُمم Wic Reset Connect لإعادة ضبط العداد المتوافق في Epson ET-2821. يجب مع ذلك فحص نظام الحبر المهدور الفعلي وصيانته عند الضرورة.

Windows 7–11كمبيوتر شخصي أو محمول
USB مباشربدون Wi-Fi أو موزّع
الإنترنتللتحقق من المفتاح
مفتاح إعادة الضبطلهذه العملية
خطوة بخطوة

Reset the counter in Epson ET-2821

جهّز الكمبيوتر والاتصال أولًا. تحدث معظم المحاولات غير الناجحة بسبب فقدان برنامج التشغيل الأصلي، أو الاتصال غير المباشر عبر USB، أو استخدام أداة Epson أخرى للطابعة.

  1. ثبّت برنامج التشغيل الأصلي

    Install the official Epson driver for ET-2821 and confirm that Windows can see the printer.

  2. الاتصال مباشرةً عبر USB

    Connect Epson ET-2821 to the computer without Wi-Fi, a hub or an adapter.

  3. ابدأ تشغيل Wic Reset Connect

    Close Epson Status Monitor, run Wic Reset Connect as Administrator and select Epson ET-2821.

  4. أدخل المفتاح وأعد ضبط العداد

    أدخل المفتاح الذي تم شراؤه، واختر Reset، وأبقِ الطابعة متصلة حتى اكتمال العملية.

أكمل بشكل صحيح: After the program confirms completion, close it, turn Epson ET-2821 off for about 10 seconds and switch it on again. The maintenance lock should be cleared.
If Epson ET-2821 is not detected
  • Install the original Epson driver for ET-2821; a generic Windows driver may not expose the required communication interface.
  • جرّب منفذ USB آخر وكابل USB معروفًا بقدرته على نقل البيانات إذا لم يتم اكتشاف الطابعة.
  • وصّل الطابعة مباشرةً بالكمبيوتر. لا تستخدم Wi-Fi أو موزّع USB أو محطة إرساء أو خادم طباعة.
  • شغّل Wic Reset Connect كمسؤول وحافظ على اتصال الإنترنت نشطًا طوال عملية التحقق.

فتح التعليمات الكاملة

الأسئلة الشائعة

Epson ET-2821 reset FAQ

Can I reset Epson ET-2821 over Wi-Fi?

لا. يتطلب Wic Reset Connect اتصال USB مباشرًا بالكمبيوتر الذي يعمل بنظام Windows.

Does Epson ET-2821 need service mode?

لا. لا تستخدم طابعات Epson تسلسل وضع الخدمة Canon. صِل الطابعة بشكل طبيعي عبر USB.

كم تستغرق إعادة الضبط؟

تكتمل إعادة الضبط نفسها عادةً خلال نحو 1–2 دقيقة بعد اكتشاف الطابعة بشكل صحيح.

أعد الضبط بثقة

Restore Epson ET-2821

Use the model-specific steps above to reset Epson ET-2821 with a stable connection and a valid key.

مفتاح إعادة الضبط: $8,00
Shopping Cart
اختر عملتك