Model-specific reset guide

Canon TS705 Ink Absorber Full Reset

Canon TS705 may block print jobs after recording enough cleaning and maintenance cycles. Use the sequence below to enter service mode and reset the stored value.

مفتاح إعادة الضبط$8,00
Instant email deliveryيشمل الدعم الفني ما يلي:Replacement key after a failed reset
The problem

Why Canon TS705 reports an absorber error

The absorber pads collect ink generated during print-head cleaning. Canon TS705 tracks those maintenance cycles in memory rather than measuring the pads directly.

Wic Reset Connect is designed to reset the compatible counter in Canon TS705. The physical waste ink system should still be inspected and maintained when necessary.

Required for Canon

How to enter service mode on Canon TS705

  1. Turn the printer off.
  2. اضغط مع الاستمرار إيقاف/إعادة تعيين.
  3. أثناء الضغط مع الاستمرار على إيقاف/إعادة الضبط، اضغط مع الاستمرار على الطاقة.
  4. Release Stop/Reset but keep holding Power.
  5. Press and release Stop/Reset 5 مرات.
  6. Wait briefly, then release Power. The power indicator should remain steadily lit.
5Stop/Reset pressesSee all methods
Windows 7–11PC or laptop
Direct USBNo Wi-Fi or hub
InternetFor key validation
مفتاح إعادة الضبطFor this operation
Step by step

Reset the counter in Canon TS705

Prepare Canon TS705 before entering the key. A stable service-mode state and direct USB connection are essential.

  1. Prepare the printer

    Resolve other errors, confirm a steady power light and enter service mode using the sequence above.

  2. Connect directly by USB

    Connect Canon TS705 to a Windows 7, 8, 10 or 11 computer without Wi-Fi or a USB hub.

  3. Start Wic Reset Connect

    Run the program as Administrator and wait until the Canon service-mode device is detected.

  4. Enter the key and reset

    Enter the purchased key, select Reset and keep the printer connected until confirmation appears.

Finish correctly: After the reset completes, disconnect from service mode by restarting Canon TS705. Allow the printer to finish its normal startup before testing a page.
If Canon TS705 is not detected
  • If the power light blinks, resolve the displayed cartridge, paper or mechanical error before trying service mode again.
  • Repeat the button sequence at a steady pace; releasing Power too early is a common reason service mode fails.
  • Run Wic Reset Connect as Administrator and keep internet access active for key validation.
  • Connect Canon TS705 directly to the computer and try another data-capable USB cable or port.

Open full instructions

Common questions

Canon TS705 reset FAQ

What if my reset key was used during a failed attempt?

Correct the cause first, then use the new-key generator or contact support for assistance.

Can I perform the reset over Wi-Fi?

No. Use a direct USB connection between the printer and a Windows computer.

كم مرة يجب أن أضغط على زر الإيقاف/إعادة الضبط؟

For Canon TS705, use 5 Stop/Reset presses in the sequence shown on this page.

Reset with confidence

Restore Canon TS705

Wic Reset Connect combines a guided reset with support if Canon TS705 does not respond as expected.

Reset key: $8,00
Shopping Cart
اختر عملتك