特定型号重置指南
Epson XP-800 Reset Waste Ink Counter
Epson XP-800 may refuse new print jobs after estimating that the waste ink pads have reached their service limit. Wic Reset Connect can reset the software counter after the printer is prepared correctly.
The counter behind the Epson XP-800 warning
Waste ink produced by cleaning cycles is collected inside the printer. Epson XP-800 tracks those cycles electronically and can stop printing when the calculated limit is reached.
Wic Reset Connect 旨在重置兼容的计数器 Epson XP-800. 。必要时仍应检查并维护实体废墨系统。.
Reset the counter in Epson XP-800
先完成以下连接检查，然后运行重置程序；在此过程中不要打开其他打印机程序。.
-
安装原始驱动程序
Install the official Epson driver for XP-800 and confirm that Windows can see the printer.
-
通过 USB 直接连接
Connect Epson XP-800 to the computer without Wi-Fi, a hub or an adapter.
-
启动 Wic Reset Connect
Close Epson Status Monitor, run Wic Reset Connect as Administrator and select Epson XP-800.
-
输入密钥并重置
输入已购买的密钥，选择“重置”，并保持打印机连接状态，直到操作完成。.
If Epson XP-800 is not detected
- 以管理员身份运行 Wic Reset Connect，并在整个验证过程中保持互联网连接处于活动状态。.
- Install the original Epson driver for XP-800; a generic Windows driver may not expose the required communication interface.
- 开始前，请关闭 Epson 状态监视器以及任何其他 Epson 维护软件，以便进行 Wic Reset Connect。.
- 如果未检测到打印机，请尝试其他 USB 端口和已知支持数据传输的 USB 线缆。.
Epson XP-800 reset FAQ
Can I reset Epson XP-800 over Wi-Fi?
不能。Wic Reset Connect 需要通过 USB 直接连接到 Windows 计算机。.
重置需要多长时间？
打印机被正确检测到后，重置本身通常会在约 1–2 分钟内完成。.
Does Epson XP-800 need service mode?
不需要。Epson 打印机不使用 Canon 服务模式操作顺序。通过 USB 正常连接打印机即可。.