特定型号重置指南
Epson WorkForce 625 重置废墨计数器
The service-required message on Epson WorkForce 625 often relates to the internal waste ink counter rather than an empty cartridge or paper fault. The steps below help you confirm and resolve that condition.
The counter behind the Epson WorkForce 625 warning
During head cleaning and normal maintenance, unused ink is directed into internal absorber pads. Epson WorkForce 625 estimates that accumulation with a software counter; it does not directly measure the physical amount of ink in the pads.
Wic Reset Connect 旨在重置兼容的计数器 Epson WorkForce 625. 。必要时仍应检查并维护实体废墨系统。.
Reset the counter in Epson WorkForce 625
重置通常只需几分钟，但在使用密钥之前，必须正确检测到打印机。.
-
安装原始驱动程序
Install the official Epson driver for WorkForce 625 and confirm that Windows can see the printer.
-
通过 USB 直接连接
Connect Epson WorkForce 625 to the computer without Wi-Fi, a hub or an adapter.
-
启动 Wic Reset Connect
Close Epson Status Monitor, run Wic Reset Connect as Administrator and select Epson WorkForce 625.
-
输入密钥并重置
输入已购买的密钥，选择“重置”，并保持打印机连接状态，直到操作完成。.
If Epson WorkForce 625 is not detected
- 清除暂停的打印任务；如果其他程序占用了 USB 连接，请同时重新启动打印机和 Windows。.
- 如果未检测到打印机，请尝试其他 USB 端口和已知支持数据传输的 USB 线缆。.
- Install the original Epson driver for WorkForce 625; a generic Windows driver may not expose the required communication interface.
- 将打印机直接连接到计算机。不要使用 Wi-Fi、USB 集线器、扩展坞或打印服务器。.
Epson WorkForce 625 reset FAQ
重置会清洁或更换墨垫吗？
不会。它会更改存储的计数器值。当实体废墨系统的状况需要时，请对其进行检查、清洁或更换。.
Does Epson WorkForce 625 need service mode?
不需要。Epson 打印机不使用 Canon 服务模式操作顺序。通过 USB 正常连接打印机即可。.
如果第一次重置尝试失败怎么办？
请先解决驱动程序或 USB 通信问题。如果密钥已被使用，请使用新密钥生成器或联系支持人员。.