Model-specific reset guide
爱普生 WorkForce 315 重置废墨计数器
When Epson WorkForce 315 reports that an ink pad needs service, restarting the printer alone normally does not clear the lock. A compatible reset procedure is required.
The counter behind the Epson WorkForce 315 warning
Waste ink produced by cleaning cycles is collected inside the printer. Epson WorkForce 315 tracks those cycles electronically and can stop printing when the calculated limit is reached.
Wic Reset Connect is designed to reset the compatible counter in Epson WorkForce 315. The physical waste ink system should still be inspected and maintained when necessary.
Reset the counter in Epson WorkForce 315
Start with the connection checks below, then run the reset without opening other printer programs during the process.
-
Install the original driver
Install the official Epson driver for WorkForce 315 and confirm that Windows can see the printer.
-
Connect directly by USB
Connect Epson WorkForce 315 to the computer without Wi-Fi, a hub or an adapter.
-
Start Wic Reset Connect
Close Epson Status Monitor, run Wic Reset Connect as Administrator and select Epson WorkForce 315.
-
Enter the key and reset
Enter the purchased key, choose Reset and keep the printer connected until completion.
If Epson WorkForce 315 is not detected
- Try another USB port and a known data-capable USB cable if the printer is not detected.
- Run Wic Reset Connect as Administrator and keep the internet connection active throughout validation.
- Install the original Epson driver for WorkForce 315; a generic Windows driver may not expose the required communication interface.
- Close Epson Status Monitor and any other Epson maintenance software before starting Wic Reset Connect.
Epson WorkForce 315 reset FAQ
Can I reset Epson WorkForce 315 over Wi-Fi?
No. Wic Reset Connect requires a direct USB connection to the Windows computer.
What if the first reset attempt fails?
Correct the driver or USB communication problem first. If the key was consumed, use the new-key generator or contact support.
Does the reset clean or replace the ink pads?
No. It changes the stored counter value. Inspect, clean or replace the physical waste ink system when its condition requires it.
Restore Epson WorkForce 315
Use the model-specific steps above to reset Epson WorkForce 315 with a stable connection and a valid key.