Epson TX200 Ink Pad Counter Reset Guide

Epson TX200 Waste Ink Counter Reset

If your Epson TX200 suddenly refuses to print and shows a maintenance warning, it is often caused by the waste ink (ink pad) counter threshold.

The Epson TX200 tracks waste ink with an internal counter. Because it is an estimate (not a physical sensor), it may trigger before the pads are actually full.

What Causes the Epson TX200 Ink Pad Counter Warning?

与 Wic Reset Connect, you can reset the Epson TX200 waste ink counter quickly using a Windows PC, USB connection, and a valid reset key.

Epson TX200 Ink Pad Counter Reset – Quick Steps

步骤 1： Use a Windows PC (7–11) with Internet access. Connect Epson TX200 via USB (Wi-Fi reset is not supported).
步骤 2： 开放 Wic Reset Connect with admin privileges and verify device recognition for Epson TX200.
步骤 3： Use the key to reset the counter, wait for completion, then restart Epson TX200 to finalize.

购买重置密钥 ⬇️ 下载 Wic 重置连接说明

Most Epson TX200 waste counter resets finish in ~1–2 minutes.

如果检测不到打印机

以管理员身份运行应用程序。.
关闭 Epson 状态监视器或其他打印机实用程序。.
使用直接 USB 连接（避免使用集线器）。.
如果验证失败，则暂时禁用 VPN/代理。.
重新启动打印机和电脑，然后再试一次。.

常见问题

我需要服务中心吗？

通常不用于废墨计数器锁；重置通常就足够了。.

可以通过 Wi-Fi 重置吗？

重置需要通过 USB 连接到 Windows PC。.

如果重置不起作用怎么办？

检查 USB 电缆/端口，以管理员身份运行，并关闭其他打印机实用程序。.

需要多长时间？

通常约 1-2 分钟。.

Guide prepared for Epson TX200 – Waste Ink Counter Reset using Wic Reset Connect.