Epson T26 Waste Ink Counter Reset
The Epson T26 is a widely used Epson printer. Like many Epson devices, it can stop printing when the internal waste ink counter reaches its predefined limit.
The Epson T26 tracks waste ink with an internal counter. Because it is an estimate (not a physical sensor), it may trigger before the pads are actually full.
Why Does the Epson T26 Show ‘Service Required’?
Most Epson T26 waste ink counter locks are solved by a software counter reset. Wic Reset Connect 提供了一个简单明了的程序。.
常见症状
- ‘驱动程序或实用程序中的 ’需要服务"/使用寿命信息
- 维护/支持代码（因型号/驱动程序而异）
- 清洁循环后停止打印
- 重新启动打印机后，警告重复出现
Three Steps to Restore Epson T26 Printing
- 步骤 1： Connect Epson T26 to a Windows computer with a stable Internet connection using a USB cable.
- 步骤 2： 开始 Wic Reset Connect in Administrator mode and wait until Epson T26 appears in the device list.
- 步骤 3： Use the key to reset the counter, wait for completion, then restart Epson T26 to finalize.
Most Epson T26 waste counter resets finish in ~1–2 minutes.
常见问题
如果重置不起作用怎么办？
检查 USB 电缆/端口，以管理员身份运行，并关闭其他打印机实用程序。.
我需要服务中心吗？
通常不用于废墨计数器锁；重置通常就足够了。.
可以通过 Wi-Fi 重置吗？
重置需要通过 USB 连接到 Windows PC。.
需要多长时间？
通常约 1-2 分钟。.
Guide prepared for Epson T26 – Waste Ink Counter Reset using Wic Reset Connect.