Epson SX130 Waste Ink Counter Reset

The Epson SX130 delivers reliable printing, but periodic maintenance routines can increase the waste ink counter and eventually trigger a ‘Service Required’ lock.

The Epson SX130 tracks waste ink with an internal counter. Because it is an estimate (not a physical sensor), it may trigger before the pads are actually full.

Why the Epson SX130 Stops Printing (Waste Counter Limit)

与 Wic Reset Connect, you can reset the Epson SX130 waste ink counter quickly using a Windows PC, USB connection, and a valid reset key.

错误如何出现

• 打印机即使有墨水也拒绝打印
• 爱普生状态监视器显示维护警告
• 闪烁的灯光和受阻的工作
• 设备被锁定，直到执行重置

Reset Epson SX130 Waste Ink Counter in 3 Steps

1. 步骤 1： Connect Epson SX130 to a Windows computer with a stable Internet connection using a USB cable.
2. 步骤 2： 运行 Wic Reset Connect as Administrator and confirm Epson SX130 is detected.
3. 步骤 3： Use the key to reset the counter, wait for completion, then restart Epson SX130 to finalize.

Most Epson SX130 waste counter resets finish in ~1–2 minutes.

系统要求

• 有效 Wic 复位连接复位键
• 需要 USB 连接（不支持 Wi-Fi 重置）
• 重置期间稳定的互联网连接
• Windows 7/8/10/11 电脑

如果检测不到打印机

• 使用直接 USB 连接（避免使用集线器）。.
• 如果验证失败，则暂时禁用 VPN/代理。.
• 以管理员身份运行应用程序。.
• 重新启动打印机和电脑，然后再试一次。.
• 试试另一条 USB 电缆（有些电缆只能充电）。.