特定型号重置指南
Epson NX127 Reset Waste Ink Counter
When Epson NX127 reports that an ink pad needs service, restarting the printer alone normally does not clear the lock. A compatible reset procedure is required.
Before resetting Epson NX127
During head cleaning and normal maintenance, unused ink is directed into internal absorber pads. Epson NX127 estimates that accumulation with a software counter; it does not directly measure the physical amount of ink in the pads.
Wic Reset Connect 旨在重置兼容的计数器 Epson NX127. 。必要时仍应检查并维护实体废墨系统。.
Reset the counter in Epson NX127
按照以下步骤建立稳定的 USB 连接并清除废墨计数器。.
-
安装原始驱动程序
Install the official Epson driver for NX127 and confirm that Windows can see the printer.
-
通过 USB 直接连接
Connect Epson NX127 to the computer without Wi-Fi, a hub or an adapter.
-
启动 Wic Reset Connect
Close Epson Status Monitor, run Wic Reset Connect as Administrator and select Epson NX127.
-
输入密钥并重置
输入已购买的密钥，选择“重置”，并保持打印机连接状态，直到操作完成。.
If Epson NX127 is not detected
- 将打印机直接连接到计算机。不要使用 Wi-Fi、USB 集线器、扩展坞或打印服务器。.
- 开始前，请关闭 Epson 状态监视器以及任何其他 Epson 维护软件，以便进行 Wic Reset Connect。.
- 如果未检测到打印机，请尝试其他 USB 端口和已知支持数据传输的 USB 线缆。.
- Install the original Epson driver for NX127; a generic Windows driver may not expose the required communication interface.
Epson NX127 reset FAQ
重置需要多长时间？
打印机被正确检测到后，重置本身通常会在约 1–2 分钟内完成。.
重置会清洁或更换墨垫吗？
不会。它会更改存储的计数器值。当实体废墨系统的状况需要时，请对其进行检查、清洁或更换。.
Does Epson NX127 need service mode?
不需要。Epson 打印机不使用 Canon 服务模式操作顺序。通过 USB 正常连接打印机即可。.