Epson L4267 Waste Ink Counter Reset

When the Epson L4267 reaches its maintenance threshold, Epson firmware may block printing as a safeguard. In most cases, this is resolved with a counter reset.

The Epson L4267 tracks waste ink with an internal counter. Because it is an estimate (not a physical sensor), it may trigger before the pads are actually full.

What Causes the Epson L4267 Ink Pad Counter Warning?

与 Wic Reset Connect, you can reset the Epson L4267 waste ink counter quickly using a Windows PC, USB connection, and a valid reset key.

典型标志

• ‘驱动程序或实用程序中的 ’需要服务"/使用寿命信息
• 维护/支持代码（因型号/驱动程序而异）
• 清洁循环后停止打印
• 重新启动打印机后，警告重复出现

Step-by-Step: Epson L4267 Waste Counter Reset

1. 步骤 1： Connect Epson L4267 to a Windows computer with a stable Internet connection using a USB cable.
2. 步骤 2： 开放 Wic Reset Connect with admin privileges and verify device recognition for Epson L4267.
3. 步骤 3： 粘贴重置密钥，点击 重置, and after completion power-cycle Epson L4267.

Most Epson L4267 waste counter resets finish in ~1–2 minutes.

系统要求

• 有效 Wic 复位连接复位键
• 重置期间稳定的互联网连接
• Windows 7/8/10/11 电脑
• 需要 USB 连接（不支持 Wi-Fi 重置）

如果检测不到打印机

• 使用直接 USB 连接（避免使用集线器）。.
• 关闭 Epson 状态监视器或其他打印机实用程序。.
• 如果验证失败，则暂时禁用 VPN/代理。.
• 以管理员身份运行应用程序。.
• 重新启动打印机和电脑，然后再试一次。.

常见问题