Epson L3115 Waste Ink Counter Reset

If your Epson L3115 suddenly refuses to print and shows a maintenance warning, it is often caused by the waste ink (ink pad) counter threshold.

During head cleaning and maintenance cycles, excess ink is routed to internal absorber pads. The Epson L3115 uses a software counter to estimate pad saturation and locks printing at a set threshold.

Why the Epson L3115 Stops Printing (Waste Counter Limit)

与 Wic Reset Connect, you can reset the Epson L3115 waste ink counter quickly using a Windows PC, USB connection, and a valid reset key.

典型标志

• ‘驱动程序或实用程序中的 ’需要服务"/使用寿命信息
• 维护/支持代码（因型号/驱动程序而异）
• 清洁循环后停止打印
• 重新启动打印机后，警告重复出现

Step-by-Step: Epson L3115 Waste Counter Reset

1. 步骤 1： Prepare a Windows PC + USB cable and connect Epson L3115 directly. Keep Internet enabled for validation.
2. 步骤 2： 运行 Wic Reset Connect as Administrator and confirm Epson L3115 is detected.
3. 步骤 3： 粘贴重置密钥，点击 重置, and after completion power-cycle Epson L3115.

Most Epson L3115 waste counter resets finish in ~1–2 minutes.

您需要什么

• Windows 7/8/10/11 电脑
• 有效 Wic 复位连接复位键
• 重置期间稳定的互联网连接
• 需要 USB 连接（不支持 Wi-Fi 重置）

常见修复

• 试试另一条 USB 电缆（有些电缆只能充电）。.
• 重新启动打印机和电脑，然后再试一次。.
• 以管理员身份运行应用程序。.
• 使用直接 USB 连接（避免使用集线器）。.
• 关闭 Epson 状态监视器或其他打印机实用程序。.

常见问题