特定型号重置指南
Epson L1276 Reset Waste Ink Counter
Epson L1276 records cleaning cycles and waste ink usage in an internal counter. When that value reaches its programmed limit, printing can stop until the counter is reset.
Why Epson L1276 stops printing
Every cleaning cycle sends a small amount of ink to the waste ink system. Epson L1276 adds that activity to its counter and displays a maintenance warning when the programmed threshold is reached.
Wic Reset Connect 旨在重置兼容的计数器 Epson L1276. 。必要时仍应检查并维护实体废墨系统。.
Reset the counter in Epson L1276
先准备好电脑和连接。大多数尝试失败是由于缺少原始驱动程序、使用了间接 USB 连接，或其他 Epson 实用程序正在使用打印机。.
-
安装原始驱动程序
Install the official Epson driver for L1276 and confirm that Windows can see the printer.
-
通过 USB 直接连接
Connect Epson L1276 to the computer without Wi-Fi, a hub or an adapter.
-
启动 Wic Reset Connect
Close Epson Status Monitor, run Wic Reset Connect as Administrator and select Epson L1276.
-
输入密钥并重置
输入已购买的密钥，选择“重置”，并保持打印机连接状态，直到操作完成。.
If Epson L1276 is not detected
- 清除暂停的打印任务；如果其他程序占用了 USB 连接，请同时重新启动打印机和 Windows。.
- Install the original Epson driver for L1276; a generic Windows driver may not expose the required communication interface.
- 将打印机直接连接到计算机。不要使用 Wi-Fi、USB 集线器、扩展坞或打印服务器。.
- 以管理员身份运行 Wic Reset Connect，并在整个验证过程中保持互联网连接处于活动状态。.
Epson L1276 reset FAQ
重置会清洁或更换墨垫吗？
不会。它会更改存储的计数器值。当实体废墨系统的状况需要时，请对其进行检查、清洁或更换。.
重置需要多长时间？
打印机被正确检测到后，重置本身通常会在约 1–2 分钟内完成。.
Does Epson L1276 need service mode?
不需要。Epson 打印机不使用 Canon 服务模式操作顺序。通过 USB 正常连接打印机即可。.