特定型号重置指南
爱普生 L1218 重置废墨计数器
A waste ink counter warning can prevent Epson L1218 from printing even when the printer is otherwise working normally. Follow the checks and reset sequence below to restore operation safely.
Why the ink pad counter blocks Epson L1218
The printer protects against possible ink overflow by monitoring an internal service counter. On Epson L1218, reaching the threshold can trigger an ink pad warning and block further jobs.
Wic Reset Connect 旨在重置兼容的计数器 Epson L1218. 。必要时仍应检查并维护实体废墨系统。.
Reset the counter in Epson L1218
正确的准备工作可以避免在通信失败时使用重置密钥。选择“重置”前，请确认每项要求。.
-
安装原始驱动程序
Install the official Epson driver for L1218 and confirm that Windows can see the printer.
-
通过 USB 直接连接
Connect Epson L1218 to the computer without Wi-Fi, a hub or an adapter.
-
启动 Wic Reset Connect
Close Epson Status Monitor, run Wic Reset Connect as Administrator and select Epson L1218.
-
输入密钥并重置
输入已购买的密钥，选择“重置”，并保持打印机连接状态，直到操作完成。.
If Epson L1218 is not detected
- 开始前，请关闭 Epson 状态监视器以及任何其他 Epson 维护软件，以便进行 Wic Reset Connect。.
- Install the original Epson driver for L1218; a generic Windows driver may not expose the required communication interface.
- 清除暂停的打印任务；如果其他程序占用了 USB 连接，请同时重新启动打印机和 Windows。.
- 以管理员身份运行 Wic Reset Connect，并在整个验证过程中保持互联网连接处于活动状态。.
Epson L1218 reset FAQ
Can I reset Epson L1218 over Wi-Fi?
不能。Wic Reset Connect 需要通过 USB 直接连接到 Windows 计算机。.
Does Epson L1218 need service mode?
不需要。Epson 打印机不使用 Canon 服务模式操作顺序。通过 USB 正常连接打印机即可。.
重置需要多长时间？
打印机被正确检测到后，重置本身通常会在约 1–2 分钟内完成。.