Model-specific reset guide
爱普生 K101 重置废墨计数器
Epson K101 records cleaning cycles and waste ink usage in an internal counter. When that value reaches its programmed limit, printing can stop until the counter is reset.
Before resetting Epson K101
Waste ink produced by cleaning cycles is collected inside the printer. Epson K101 tracks those cycles electronically and can stop printing when the calculated limit is reached.
Wic Reset Connect is designed to reset the compatible counter in Epson K101. The physical waste ink system should still be inspected and maintained when necessary.
Reset the counter in Epson K101
Complete these steps in order. A direct USB connection and the original Epson driver are essential for reliable communication.
-
Install the original driver
Install the official Epson driver for K101 and confirm that Windows can see the printer.
-
Connect directly by USB
Connect Epson K101 to the computer without Wi-Fi, a hub or an adapter.
-
Start Wic Reset Connect
Close Epson Status Monitor, run Wic Reset Connect as Administrator and select Epson K101.
-
Enter the key and reset
Enter the purchased key, choose Reset and keep the printer connected until completion.
If Epson K101 is not detected
- Clear paused print jobs and restart both the printer and Windows if another program is holding the USB connection.
- Connect the printer directly to the computer. Do not use Wi-Fi, a USB hub, docking station or print server.
- Run Wic Reset Connect as Administrator and keep the internet connection active throughout validation.
- Try another USB port and a known data-capable USB cable if the printer is not detected.
Epson K101 reset FAQ
Does the reset clean or replace the ink pads?
No. It changes the stored counter value. Inspect, clean or replace the physical waste ink system when its condition requires it.
Can I reset Epson K101 over Wi-Fi?
No. Wic Reset Connect requires a direct USB connection to the Windows computer.
Does Epson K101 need service mode?
No. Epson printers do not use the Canon service-mode sequence. Connect the printer normally by USB.
Restore Epson K101
Use the model-specific steps above to reset Epson K101 with a stable connection and a valid key.