特定型号重置指南
Epson ET-3600 Reset Waste Ink Counter
Epson ET-3600 records cleaning cycles and waste ink usage in an internal counter. When that value reaches its programmed limit, printing can stop until the counter is reset.
Before resetting Epson ET-3600
An ink pad message is a maintenance safeguard. It indicates that Epson ET-3600 has reached a stored waste ink value that must be reset before normal printing can resume.
Wic Reset Connect 旨在重置兼容的计数器 Epson ET-3600. 。必要时仍应检查并维护实体废墨系统。.
Reset the counter in Epson ET-3600
请按顺序完成这些步骤。直接 USB 连接以及原始 Epson 驱动程序对于实现可靠通信至关重要。.
-
安装原始驱动程序
Install the official Epson driver for ET-3600 and confirm that Windows can see the printer.
-
通过 USB 直接连接
Connect Epson ET-3600 to the computer without Wi-Fi, a hub or an adapter.
-
启动 Wic Reset Connect
Close Epson Status Monitor, run Wic Reset Connect as Administrator and select Epson ET-3600.
-
输入密钥并重置
输入已购买的密钥，选择“重置”，并保持打印机连接状态，直到操作完成。.
If Epson ET-3600 is not detected
- 开始前，请关闭 Epson 状态监视器以及任何其他 Epson 维护软件，以便进行 Wic Reset Connect。.
- Install the original Epson driver for ET-3600; a generic Windows driver may not expose the required communication interface.
- 清除暂停的打印任务；如果其他程序占用了 USB 连接，请同时重新启动打印机和 Windows。.
- 以管理员身份运行 Wic Reset Connect，并在整个验证过程中保持互联网连接处于活动状态。.
Epson ET-3600 reset FAQ
Can I reset Epson ET-3600 over Wi-Fi?
不能。Wic Reset Connect 需要通过 USB 直接连接到 Windows 计算机。.
重置需要多长时间？
打印机被正确检测到后，重置本身通常会在约 1–2 分钟内完成。.
Does Epson ET-3600 need service mode?
不需要。Epson 打印机不使用 Canon 服务模式操作顺序。通过 USB 正常连接打印机即可。.