Epson ET-2850 Waste Ink Counter Reset

The Epson ET-2850 is a widely used Epson printer. Like many Epson devices, it can stop printing when the internal waste ink counter reaches its predefined limit.

The Epson ET-2850 tracks waste ink with an internal counter. Because it is an estimate (not a physical sensor), it may trigger before the pads are actually full.

Why the Epson ET-2850 Stops Printing (Waste Counter Limit)

Most Epson ET-2850 waste ink counter locks are solved by a software counter reset. Wic Reset Connect 提供了一个简单明了的程序。.

错误如何出现

‘驱动程序或实用程序中的 ’需要服务"/使用寿命信息
维护/支持代码（因型号/驱动程序而异）
清洁循环后停止打印
重新启动打印机后，警告重复出现

Three Steps to Restore Epson ET-2850 Printing

步骤 1： Use a Windows PC (7–11) with Internet access. Connect Epson ET-2850 via USB (Wi-Fi reset is not supported).
步骤 2： 开始 Wic Reset Connect in Administrator mode and wait until Epson ET-2850 appears in the device list.
步骤 3： 输入重置密钥并按重置. Wait ~1–2 minutes, then restart Epson ET-2850.

购买重置密钥 ⬇️ 下载 Wic 重置连接说明

Most Epson ET-2850 waste counter resets finish in ~1–2 minutes.

系统要求

有效 Wic 复位连接复位键
重置期间稳定的互联网连接
Windows 7/8/10/11 电脑
需要 USB 连接（不支持 Wi-Fi 重置）

常见问题

如果重置不起作用怎么办？

检查 USB 电缆/端口，以管理员身份运行，并关闭其他打印机实用程序。.

我需要服务中心吗？

通常不用于废墨计数器锁；重置通常就足够了。.

可以通过 Wi-Fi 重置吗？

重置需要通过 USB 连接到 Windows PC。.

需要多长时间？

通常约 1-2 分钟。.

Guide prepared for Epson ET-2850 – Waste Ink Counter Reset using Wic Reset Connect.