Reset Epson ET-2600 Waste Ink Counter in Minutes

Epson ET-2600 Waste Ink Counter Reset

The Epson ET-2600 delivers reliable printing, but periodic maintenance routines can increase the waste ink counter and eventually trigger a ‘Service Required’ lock.

A waste ink counter in the Epson ET-2600 accumulates after cleaning operations. Once it reaches a limit, printing is stopped to prevent overflow.

Why the Epson ET-2600 Stops Printing (Waste Counter Limit)

Most Epson ET-2600 waste ink counter locks are solved by a software counter reset. Wic Reset Connect provides a straightforward procedure.

Typical Signs

  • ‘Service Required’ / service life message in driver or utility
  • Maintenance/support code (varies by model/driver)
  • Printing stops after cleaning cycles
  • Warning repeats after restarting the printer

Epson ET-2600 Ink Pad Counter Reset – Quick Steps

  1. Step 1: Use a Windows PC (7–11) with Internet access. Connect Epson ET-2600 via USB (Wi-Fi reset is not supported).
  2. Step 2: Run Wic Reset Connect as Administrator and confirm Epson ET-2600 is detected.
  3. Step 3: Enter your reset key and press Reset. Wait ~1–2 minutes, then restart Epson ET-2600.
Buy Reset Key ⬇️ Download Wic Reset Connect 说明

Most Epson ET-2600 waste counter resets finish in ~1–2 minutes.

System Requirements

  • Valid Wic Reset Connect reset key
  • Stable Internet connection during reset
  • Windows 7/8/10/11 PC
  • USB connection required (Wi-Fi reset not supported)

Common Fixes

  • Restart printer and PC, then try again.
  • Use a direct USB connection (avoid hubs).
  • Run the app as Administrator.
  • Try another USB cable (some cables are charge-only).
  • Temporarily disable VPN/proxy if validation fails.

FAQ

Do I need a service center?
Typically not for a waste ink counter lock; a reset is usually sufficient.
What if reset doesn’t work?
Check USB cable/port, run as admin, and close other printer utilities.
Can I reset over Wi-Fi?
No. The reset requires a USB connection to a Windows PC.
How long does it take?
Usually about 1–2 minutes.

Guide prepared for Epson ET-2600 – Waste Ink Counter Reset using Wic Reset Connect.

购物车