特定型号重置指南
Epson EP-976A3 Reset Waste Ink Counter
A waste ink counter warning can prevent Epson EP-976A3 from printing even when the printer is otherwise working normally. Follow the checks and reset sequence below to restore operation safely.
What the Epson EP-976A3 service message means
Every cleaning cycle sends a small amount of ink to the waste ink system. Epson EP-976A3 adds that activity to its counter and displays a maintenance warning when the programmed threshold is reached.
Wic Reset Connect 旨在重置兼容的计数器 Epson EP-976A3. 。必要时仍应检查并维护实体废墨系统。.
Reset the counter in Epson EP-976A3
先完成以下连接检查，然后运行重置程序；在此过程中不要打开其他打印机程序。.
-
安装原始驱动程序
Install the official Epson driver for EP-976A3 and confirm that Windows can see the printer.
-
通过 USB 直接连接
Connect Epson EP-976A3 to the computer without Wi-Fi, a hub or an adapter.
-
启动 Wic Reset Connect
Close Epson Status Monitor, run Wic Reset Connect as Administrator and select Epson EP-976A3.
-
输入密钥并重置
输入已购买的密钥，选择“重置”，并保持打印机连接状态，直到操作完成。.
If Epson EP-976A3 is not detected
- 清除暂停的打印任务；如果其他程序占用了 USB 连接，请同时重新启动打印机和 Windows。.
- 如果未检测到打印机，请尝试其他 USB 端口和已知支持数据传输的 USB 线缆。.
- 将打印机直接连接到计算机。不要使用 Wi-Fi、USB 集线器、扩展坞或打印服务器。.
- Install the original Epson driver for EP-976A3; a generic Windows driver may not expose the required communication interface.
Epson EP-976A3 reset FAQ
Does Epson EP-976A3 need service mode?
不需要。Epson 打印机不使用 Canon 服务模式操作顺序。通过 USB 正常连接打印机即可。.
重置需要多长时间？
打印机被正确检测到后，重置本身通常会在约 1–2 分钟内完成。.
重置会清洁或更换墨垫吗？
不会。它会更改存储的计数器值。当实体废墨系统的状况需要时，请对其进行检查、清洁或更换。.