Epson EP-901A Waste Ink Counter Reset
The Epson EP-901A is a widely used Epson printer. Like many Epson devices, it can stop printing when the internal waste ink counter reaches its predefined limit.
The Epson EP-901A tracks waste ink with an internal counter. Because it is an estimate (not a physical sensor), it may trigger before the pads are actually full.
Why the Epson EP-901A Stops Printing (Waste Counter Limit)
Most Epson EP-901A waste ink counter locks are solved by a software counter reset. Wic Reset Connect 提供了一个简单明了的程序。.
错误如何出现
- 打印机即使有墨水也拒绝打印
- 爱普生状态监视器显示维护警告
- 闪烁的灯光和受阻的工作
- 设备被锁定,直到执行重置
Three Steps to Restore Epson EP-901A Printing
- 步骤 1: Prepare a Windows PC + USB cable and connect Epson EP-901A directly. Keep Internet enabled for validation.
- 步骤 2: 开放 Wic Reset Connect with admin privileges and verify device recognition for Epson EP-901A.
- 步骤 3: Use the key to reset the counter, wait for completion, then restart Epson EP-901A to finalize.
Most Epson EP-901A waste counter resets finish in ~1–2 minutes.
系统要求
- 重置期间稳定的互联网连接
- 需要 USB 连接(不支持 Wi-Fi 重置)
- Windows 7/8/10/11 电脑
- 有效 Wic 复位连接复位键
如果检测不到打印机
- 试试另一条 USB 电缆(有些电缆只能充电)。.
- 使用直接 USB 连接(避免使用集线器)。.
- 以管理员身份运行应用程序。.
- 重新启动打印机和电脑,然后再试一次。.
- 如果验证失败,则暂时禁用 VPN/代理。.
常见问题
需要多长时间?
通常约 1-2 分钟。.
如果重置不起作用怎么办?
检查 USB 电缆/端口,以管理员身份运行,并关闭其他打印机实用程序。.
我需要服务中心吗?
通常不用于废墨计数器锁;重置通常就足够了。.
可以通过 Wi-Fi 重置吗?
重置需要通过 USB 连接到 Windows PC。.
Guide prepared for Epson EP-901A – Waste Ink Counter Reset using Wic Reset Connect.