Fix Epson BX620FWD Service Required – Waste Counter Reset

Epson BX620FWD Waste Ink Counter Reset

The Epson BX620FWD delivers reliable printing, but periodic maintenance routines can increase the waste ink counter and eventually trigger a ‘Service Required’ lock.

The Epson BX620FWD tracks waste ink with an internal counter. Because it is an estimate (not a physical sensor), it may trigger before the pads are actually full.

Why Does the Epson BX620FWD Show ‘Service Required’?

With Wic Reset Connect, you can reset the Epson BX620FWD waste ink counter quickly using a Windows PC, USB connection, and a valid reset key.

Reset Epson BX620FWD Waste Ink Counter in 3 Steps

  1. Step 1: Prepare a Windows PC + USB cable and connect Epson BX620FWD directly. Keep Internet enabled for validation.
  2. Step 2: Run Wic Reset Connect as Administrator and confirm Epson BX620FWD is detected.
  3. Step 3: Enter your reset key and press Reset. Wait ~1–2 minutes, then restart Epson BX620FWD.
Buy Reset Key ⬇️ Download Wic Reset Connect 说明

Most Epson BX620FWD waste counter resets finish in ~1–2 minutes.

If the Printer Is Not Detected

  • Try another USB cable (some cables are charge-only).
  • Run the app as Administrator.
  • Temporarily disable VPN/proxy if validation fails.
  • Use a direct USB connection (avoid hubs).
  • Restart printer and PC, then try again.

Frequently Asked Questions

What if reset doesn’t work?
Check USB cable/port, run as admin, and close other printer utilities.
How long does it take?
Usually about 1–2 minutes.
Can I reset over Wi-Fi?
No. The reset requires a USB connection to a Windows PC.
Do I need a service center?
Typically not for a waste ink counter lock; a reset is usually sufficient.

Guide prepared for Epson BX620FWD – Waste Ink Counter Reset using Wic Reset Connect.

购物车