Canon TS9010 Ink Absorber Full Reset

The “Ink Absorber Full” / service required message on Canon TS9010 is common after many cleaning cycles. In most cases, a counter reset restores printing.

During head cleaning, surplus ink is routed to internal absorber pads. Canon TS9010 monitors this via a counter and can lock printing at a threshold.

This page is prepared for Canon TS9010. Service mode instructions are shown only when a matching series procedure is known.

错误如何出现

• 屏幕或驾驶员显示维修/保养警告
• 打印机即使有墨水也拒绝打印
• 闪烁的指示灯和排队作业失败
• 重新启动后错误再次出现

How to Enter Service Mode on Canon TS9010

To access maintenance functions, Canon TS9010 may need to be placed in service mode first.

1. 打开打印机 关闭.
2. 按住 停止/重置.
3. 在按住停止/复位的同时，按住 电源.
4. 发布 停止/重置 (继续保持动力）。.
5. 新闻 停止/重置 5次.
6. 发布 电源 - 打印机应进入服务模式。.

如果不起作用，请仔细重复上述步骤。按压次数取决于系列。.

完成重置和恢复打印

Once the counter is cleared, Canon TS9010 should exit the locked state and printing should resume normally.

警告

如果吸收垫确实饱和，忽视维护可能会导致打印机内部漏墨。计数器重置只能消除软件锁。.

重置工具和说明

如果您的机型没有显示维修模式部分，则表示没有找到与其系列匹配的程序。.