Model-specific reset guide

Canon TS3500 Ink Absorber Full Reset

If Canon TS3500 displays an ink absorber full or service-required warning, the stored waste ink counter may have reached its limit. This guide covers service mode, USB preparation and the reset itself.

重置键$8,00
Instant email delivery包含技术支持Replacement key after a failed reset
The problem

Understanding the Canon TS3500 ink absorber warning

The absorber pads collect ink generated during print-head cleaning. Canon TS3500 tracks those maintenance cycles in memory rather than measuring the pads directly.

Wic Reset Connect is designed to reset the compatible counter in Canon TS3500. The physical waste ink system should still be inspected and maintained when necessary.

Required for Canon

How to enter service mode on Canon TS3500

  1. Turn the printer off.
  2. 按住 停止/重置.
  3. 在按住停止/复位的同时,按住 电源.
  4. Release Stop/Reset but keep holding Power.
  5. Press and release Stop/Reset 5次.
  6. Wait briefly, then release Power. The power indicator should remain steadily lit.
5Stop/Reset pressesSee all methods
Windows 7–11PC or laptop
Direct USBNo Wi-Fi or hub
InternetFor key validation
重置键For this operation
Step by step

Reset the counter in Canon TS3500

Work through the sequence without rushing. Incorrect button timing or a blinking power light means the printer is not ready for the counter reset.

  1. Prepare the printer

    Resolve other errors, confirm a steady power light and enter service mode using the sequence above.

  2. Connect directly by USB

    Connect Canon TS3500 to a Windows 7, 8, 10 or 11 computer without Wi-Fi or a USB hub.

  3. Start Wic Reset Connect

    Run the program as Administrator and wait until the Canon service-mode device is detected.

  4. Enter the key and reset

    Enter the purchased key, select Reset and keep the printer connected until confirmation appears.

Finish correctly: Do not unplug the USB cable while data is being written. Restart Canon TS3500 only when Wic Reset Connect confirms completion.
If Canon TS3500 is not detected
  • Close Canon maintenance utilities and clear paused print jobs before opening Wic Reset Connect.
  • Repeat the button sequence at a steady pace; releasing Power too early is a common reason service mode fails.
  • If the power light blinks, resolve the displayed cartridge, paper or mechanical error before trying service mode again.
  • Run Wic Reset Connect as Administrator and keep internet access active for key validation.

Open full instructions

Common questions

Canon TS3500 reset FAQ

What if my reset key was used during a failed attempt?

Correct the cause first, then use the new-key generator or contact support for assistance.

应该按多少次停止/复位键?

For Canon TS3500, use 5 Stop/Reset presses in the sequence shown on this page.

Can I perform the reset over Wi-Fi?

No. Use a direct USB connection between the printer and a Windows computer.

Reset with confidence

Restore Canon TS3500

Follow the verified steps for Canon TS3500, then restart the printer and return to normal operation.

Reset key: $8,00
购物车
选择货币