Canon MG5650 Ink Absorber Full Reset

If your Canon MG5650 suddenly refuses to print and shows a maintenance or service warning, the ink absorber counter may have reached its limit.

During head cleaning, surplus ink is routed to internal absorber pads. Canon MG5650 monitors this via a counter and can lock printing at a threshold.

This page is prepared for Canon MG5650. Service mode instructions are shown only when a matching series procedure is known.

How to Enter Service Mode on Canon MG5650

To access maintenance functions, Canon MG5650 may need to be placed in service mode first.

1. 打开打印机 关闭.
2. 按住 停止/重置.
3. 在按住停止/复位的同时，按住 电源.
4. 发布 停止/重置 (继续保持动力）。.
5. 新闻 停止/重置 6次.
6. 发布 电源 - 打印机应进入服务模式。.

如果不起作用，请仔细重复上述步骤。按压次数取决于系列。.

执行废墨计数器重置

Once the counter is cleared, Canon MG5650 should exit the locked state and printing should resume normally.

继续之前

如果吸收垫确实饱和，忽视维护可能会导致打印机内部漏墨。计数器重置只能消除软件锁。.

重置工具和说明

使用可靠的 USB 连接，并按顺序执行步骤。.

常见修复

• 仔细重复维修模式步骤（时间很重要）。.
• 为您的系列使用正确的停止/重置按压次数。.
• 关闭打印机电源，再试一次。.
• 如果使用 PC 软件，请尝试不同的 USB 电缆/端口。.
• 重置时关闭其他佳能打印机实用程序。.

常见问题