Canon MG4200 Ink Absorber Full Reset

Canon MG4200 can lock printing when the waste ink (ink absorber) counter hits a predefined threshold. This guide explains how to reset it.

During head cleaning, surplus ink is routed to internal absorber pads. Canon MG4200 monitors this via a counter and can lock printing at a threshold.

This page is prepared for Canon MG4200. Service mode instructions are shown only when a matching series procedure is known.

错误如何出现

• ‘墨水吸收器已满’/‘需要维修 ’信息
• 支持/服务代码（因系列而异）
• 清洁循环后打印受阻
• 需要重置才能继续打印

How to Enter Service Mode on Canon MG4200

To access maintenance functions, Canon MG4200 may need to be placed in service mode first.

1. 打开打印机 关闭.
2. 按住 停止/重置.
3. 在按住停止/复位的同时，按住 电源.
4. 发布 停止/重置 (继续保持动力）。.
5. 新闻 停止/重置 6次.
6. 发布 电源 - 打印机应进入服务模式。.

如果不起作用，请仔细重复上述步骤。按压次数取决于系列。.

重置吸墨器计数器

Once the counter is cleared, Canon MG4200 should exit the locked state and printing should resume normally.

重要说明

将重置视为维护步骤。如果打印机使用率极高，可考虑清洁/更换吸收垫，以避免溢出。.

下载并开始使用

使用可靠的 USB 连接，并按顺序执行步骤。.