Epson XP-750 Waste Ink Counter Reset

The Epson XP-750 is a widely used Epson printer. Like many Epson devices, it can stop printing when the internal waste ink counter reaches its predefined limit.

A waste ink counter in the Epson XP-750 accumulates after cleaning operations. Once it reaches a limit, printing is stopped to prevent overflow.

What Causes the Epson XP-750 Ink Pad Counter Warning?

With Wic Reset Connect, you can reset the Epson XP-750 waste ink counter quickly using a Windows PC, USB connection, and a valid reset key.

Common Symptoms

• Printer refuses to print even with ink available
• Epson Status Monitor shows maintenance warning
• Blinking lights and blocked jobs
• Device is locked until reset is performed

Reset Epson XP-750 Waste Ink Counter in 3 Steps

1. Крок 1: Connect Epson XP-750 to a Windows computer with a stable Internet connection using a USB cable.
2. Крок 2: Run Wic Reset Connect as Administrator and confirm Epson XP-750 is detected.
3. Крок 3: Paste the reset key, click Reset, and after completion power-cycle Epson XP-750.

Most Epson XP-750 waste counter resets finish in ~1–2 minutes.

System Requirements

• USB connection required (Wi-Fi reset not supported)
• Stable Internet connection during reset
• Valid Wic Reset Connect reset key
• Windows 7/8/10/11 PC

If the Printer Is Not Detected

• Use a direct USB connection (avoid hubs).
• Try another USB cable (some cables are charge-only).
• Run the app as Administrator.
• Temporarily disable VPN/proxy if validation fails.
• Restart printer and PC, then try again.

FAQ