Fix Epson XP-401 Service Required – Waste Counter Reset

Epson XP-401 Waste Ink Counter Reset

The Epson XP-401 delivers reliable printing, but periodic maintenance routines can increase the waste ink counter and eventually trigger a ‘Service Required’ lock.

The Epson XP-401 tracks waste ink with an internal counter. Because it is an estimate (not a physical sensor), it may trigger before the pads are actually full.

Why Does the Epson XP-401 Show ‘Service Required’?

With Wic Reset Connect, you can reset the Epson XP-401 waste ink counter quickly using a Windows PC, USB connection, and a valid reset key.

How the Error Appears

  • Printer refuses to print even with ink available
  • Epson Status Monitor shows maintenance warning
  • Blinking lights and blocked jobs
  • Device is locked until reset is performed

Three Steps to Restore Epson XP-401 Printing

  1. Крок 1: Prepare a Windows PC + USB cable and connect Epson XP-401 directly. Keep Internet enabled for validation.
  2. Крок 2: Run Wic Reset Connect as Administrator and confirm Epson XP-401 is detected.
  3. Крок 3: Use the key to reset the counter, wait for completion, then restart Epson XP-401 to finalize.
Buy Reset Key ⬇️ Download Wic Reset Connect Інструкції

Most Epson XP-401 waste counter resets finish in ~1–2 minutes.

System Requirements

  • Valid Wic Reset Connect reset key
  • USB connection required (Wi-Fi reset not supported)
  • Stable Internet connection during reset
  • Windows 7/8/10/11 PC

FAQ

Can I reset over Wi-Fi?
No. The reset requires a USB connection to a Windows PC.
Do I need a service center?
Typically not for a waste ink counter lock; a reset is usually sufficient.
How long does it take?
Usually about 1–2 minutes.
What if reset doesn’t work?
Check USB cable/port, run as admin, and close other printer utilities.

Guide prepared for Epson XP-401 – Waste Ink Counter Reset using Wic Reset Connect.

Кошик для покупок