How to Reset Epson XP-212 Waste Ink Counter

Epson XP-212 Waste Ink Counter Reset

The Epson XP-212 is a widely used Epson printer. Like many Epson devices, it can stop printing when the internal waste ink counter reaches its predefined limit.

The Epson XP-212 tracks waste ink with an internal counter. Because it is an estimate (not a physical sensor), it may trigger before the pads are actually full.

Why Does the Epson XP-212 Show ‘Service Required’?

Most Epson XP-212 waste ink counter locks are solved by a software counter reset. Wic Reset Connect provides a straightforward procedure.

Common Symptoms

  • Printer refuses to print even with ink available
  • Epson Status Monitor shows maintenance warning
  • Blinking lights and blocked jobs
  • Device is locked until reset is performed

Step-by-Step: Epson XP-212 Waste Counter Reset

  1. Крок 1: Use a Windows PC (7–11) with Internet access. Connect Epson XP-212 via USB (Wi-Fi reset is not supported).
  2. Крок 2: Open Wic Reset Connect with admin privileges and verify device recognition for Epson XP-212.
  3. Крок 3: Enter your reset key and press Reset. Wait ~1–2 minutes, then restart Epson XP-212.
Buy Reset Key ⬇️ Download Wic Reset Connect Інструкції

Most Epson XP-212 waste counter resets finish in ~1–2 minutes.

Before You Begin

  • USB connection required (Wi-Fi reset not supported)
  • Valid Wic Reset Connect reset key
  • Windows 7/8/10/11 PC
  • Stable Internet connection during reset

Frequently Asked Questions

What if reset doesn’t work?
Check USB cable/port, run as admin, and close other printer utilities.
How long does it take?
Usually about 1–2 minutes.
Do I need a service center?
Typically not for a waste ink counter lock; a reset is usually sufficient.
Can I reset over Wi-Fi?
No. The reset requires a USB connection to a Windows PC.

Guide prepared for Epson XP-212 – Waste Ink Counter Reset using Wic Reset Connect.

Кошик для покупок