Epson EP-905A Waste Ink Counter Reset

If your Epson EP-905A suddenly refuses to print and shows a maintenance warning, it is often caused by the waste ink (ink pad) counter threshold.

The Epson EP-905A tracks waste ink with an internal counter. Because it is an estimate (not a physical sensor), it may trigger before the pads are actually full.

What Causes the Epson EP-905A Ink Pad Counter Warning?

With Wic Reset Connect, you can reset the Epson EP-905A waste ink counter quickly using a Windows PC, USB connection, and a valid reset key.

Reset Epson EP-905A Waste Ink Counter in 3 Steps

1. Крок 1: Prepare a Windows PC + USB cable and connect Epson EP-905A directly. Keep Internet enabled for validation.
2. Крок 2: Start Wic Reset Connect in Administrator mode and wait until Epson EP-905A appears in the device list.
3. Крок 3: Enter your reset key and press Reset. Wait ~1–2 minutes, then restart Epson EP-905A.

Most Epson EP-905A waste counter resets finish in ~1–2 minutes.

Troubleshooting

• Use a direct USB connection (avoid hubs).
• Restart printer and PC, then try again.
• Close Epson Status Monitor or other printer utilities.
• Temporarily disable VPN/proxy if validation fails.
• Run the app as Administrator.