Epson XP-2105 Waste Ink Counter Reset

The Epson XP-2105 is a widely used Epson printer. Like many Epson devices, it can stop printing when the internal waste ink counter reaches its predefined limit.

A waste ink counter in the Epson XP-2105 accumulates after cleaning operations. Once it reaches a limit, printing is stopped to prevent overflow.

What Causes the Epson XP-2105 Ink Pad Counter Warning?

With Wic Reset Connect, you can reset the Epson XP-2105 waste ink counter quickly using a Windows PC, USB connection, and a valid reset key.

Typical Signs

• ‘Service Required’ / service life message in driver or utility
• Maintenance/support code (varies by model/driver)
• Printing stops after cleaning cycles
• Warning repeats after restarting the printer

Three Steps to Restore Epson XP-2105 Printing

1. Adım 1: Connect Epson XP-2105 to a Windows computer with a stable Internet connection using a USB cable.
2. Adım 2: Run Wic Reset Connect as Administrator and confirm Epson XP-2105 is detected.
3. Adım 3: Paste the reset key, click Reset, and after completion power-cycle Epson XP-2105.

Most Epson XP-2105 waste counter resets finish in ~1–2 minutes.

System Requirements

• Valid Wic Reset Connect reset key
• Windows 7/8/10/11 PC
• USB connection required (Wi-Fi reset not supported)
• Stable Internet connection during reset

If the Printer Is Not Detected

• Temporarily disable VPN/proxy if validation fails.
• Run the app as Administrator.
• Use a direct USB connection (avoid hubs).
• Try another USB cable (some cables are charge-only).
• Close Epson Status Monitor or other printer utilities.

FAQ