Epson WF-7511 Waste Ink Counter Reset

The Epson WF-7511 is a widely used Epson printer. Like many Epson devices, it can stop printing when the internal waste ink counter reaches its predefined limit.

A waste ink counter in the Epson WF-7511 accumulates after cleaning operations. Once it reaches a limit, printing is stopped to prevent overflow.

Understanding the Epson WF-7511 Waste Ink Counter

With Wic Reset Connect, you can reset the Epson WF-7511 waste ink counter quickly using a Windows PC, USB connection, and a valid reset key.

Typical Signs

• Printer refuses to print even with ink available
• Epson Status Monitor shows maintenance warning
• Blinking lights and blocked jobs
• Device is locked until reset is performed

Reset Epson WF-7511 Waste Ink Counter in 3 Steps

1. Adım 1: Use a Windows PC (7–11) with Internet access. Connect Epson WF-7511 via USB (Wi-Fi reset is not supported).
2. Adım 2: Start Wic Reset Connect in Administrator mode and wait until Epson WF-7511 appears in the device list.
3. Adım 3: Use the key to reset the counter, wait for completion, then restart Epson WF-7511 to finalize.

Most Epson WF-7511 waste counter resets finish in ~1–2 minutes.

Before You Begin

• Stable Internet connection during reset
• Valid Wic Reset Connect reset key
• Windows 7/8/10/11 PC
• USB connection required (Wi-Fi reset not supported)

Common Fixes

• Temporarily disable VPN/proxy if validation fails.
• Close Epson Status Monitor or other printer utilities.
• Restart printer and PC, then try again.
• Try another USB cable (some cables are charge-only).
• Use a direct USB connection (avoid hubs).

FAQ