Reset Epson TX620FWD Waste Ink Counter in Minutes

Epson TX620FWD Waste Ink Counter Reset

When the Epson TX620FWD reaches its maintenance threshold, Epson firmware may block printing as a safeguard. In most cases, this is resolved with a counter reset.

A waste ink counter in the Epson TX620FWD accumulates after cleaning operations. Once it reaches a limit, printing is stopped to prevent overflow.

Understanding the Epson TX620FWD Waste Ink Counter

Most Epson TX620FWD waste ink counter locks are solved by a software counter reset. Wic Reset Connect provides a straightforward procedure.

Reset Epson TX620FWD Waste Ink Counter in 3 Steps

  1. Adım 1: Prepare a Windows PC + USB cable and connect Epson TX620FWD directly. Keep Internet enabled for validation.
  2. Adım 2: Open Wic Reset Connect with admin privileges and verify device recognition for Epson TX620FWD.
  3. Adım 3: Paste the reset key, click Reset, and after completion power-cycle Epson TX620FWD.
Buy Reset Key ⬇️ Download Wic Reset Connect Talimatlar

Most Epson TX620FWD waste counter resets finish in ~1–2 minutes.

What You Need

  • Windows 7/8/10/11 PC
  • Valid Wic Reset Connect reset key
  • USB connection required (Wi-Fi reset not supported)
  • Stable Internet connection during reset

Common Fixes

  • Close Epson Status Monitor or other printer utilities.
  • Try another USB cable (some cables are charge-only).
  • Use a direct USB connection (avoid hubs).
  • Run the app as Administrator.
  • Restart printer and PC, then try again.

Frequently Asked Questions

How long does it take?
Usually about 1–2 minutes.
What if reset doesn’t work?
Check USB cable/port, run as admin, and close other printer utilities.
Can I reset over Wi-Fi?
No. The reset requires a USB connection to a Windows PC.
Do I need a service center?
Typically not for a waste ink counter lock; a reset is usually sufficient.

Guide prepared for Epson TX620FWD – Waste Ink Counter Reset using Wic Reset Connect.

Alışveriş Sepeti