Epson T13 Waste Ink Counter Reset

The Epson T13 delivers reliable printing, but periodic maintenance routines can increase the waste ink counter and eventually trigger a ‘Service Required’ lock.

A waste ink counter in the Epson T13 accumulates after cleaning operations. Once it reaches a limit, printing is stopped to prevent overflow.

Why Does the Epson T13 Show ‘Service Required’?

A service visit is often unnecessary. Wic Reset Connect allows a safe Epson T13 waste counter reset in minutes.

Typical Signs

• Printer refuses to print even with ink available
• Epson Status Monitor shows maintenance warning
• Blinking lights and blocked jobs
• Device is locked until reset is performed

Step-by-Step: Epson T13 Waste Counter Reset

1. Adım 1: Prepare a Windows PC + USB cable and connect Epson T13 directly. Keep Internet enabled for validation.
2. Adım 2: Start Wic Reset Connect in Administrator mode and wait until Epson T13 appears in the device list.
3. Adım 3: Use the key to reset the counter, wait for completion, then restart Epson T13 to finalize.

Most Epson T13 waste counter resets finish in ~1–2 minutes.

What You Need

• Valid Wic Reset Connect reset key
• Windows 7/8/10/11 PC
• USB connection required (Wi-Fi reset not supported)
• Stable Internet connection during reset

If the Printer Is Not Detected

• Run the app as Administrator.
• Try another USB cable (some cables are charge-only).
• Restart printer and PC, then try again.
• Use a direct USB connection (avoid hubs).
• Temporarily disable VPN/proxy if validation fails.