Model-specific reset guide

Epson RX580 Reset Waste Ink Counter

Epson RX580 records cleaning cycles and waste ink usage in an internal counter. When that value reaches its programmed limit, printing can stop until the counter is reset.

Sıfırlama tuşu$8,00
Instant email deliveryTeknik destek dahildirReplacement key after a failed reset
The problem

Understanding the Epson RX580 waste ink warning

An ink pad message is a maintenance safeguard. It indicates that Epson RX580 has reached a stored waste ink value that must be reset before normal printing can resume.

Wic Reset Connect is designed to reset the compatible counter in Epson RX580. The physical waste ink system should still be inspected and maintained when necessary.

Windows 7–11PC or laptop
Direct USBNo Wi-Fi or hub
InternetFor key validation
Sıfırlama tuşuFor this operation
Step by step

Reset the counter in Epson RX580

Use the sequence below to establish a stable USB connection and clear the waste ink counter.

  1. Install the original driver

    Install the official Epson driver for RX580 and confirm that Windows can see the printer.

  2. Connect directly by USB

    Connect Epson RX580 to the computer without Wi-Fi, a hub or an adapter.

  3. Start Wic Reset Connect

    Close Epson Status Monitor, run Wic Reset Connect as Administrator and select Epson RX580.

  4. Enter the key and reset

    Enter the purchased key, choose Reset and keep the printer connected until completion.

Finish correctly: A successful reset is finalized by switching Epson RX580 off and on. The printer should then accept jobs normally.
If Epson RX580 is not detected
  • Clear paused print jobs and restart both the printer and Windows if another program is holding the USB connection.
  • Try another USB port and a known data-capable USB cable if the printer is not detected.
  • Run Wic Reset Connect as Administrator and keep the internet connection active throughout validation.
  • Install the original Epson driver for RX580; a generic Windows driver may not expose the required communication interface.

Open full instructions

Common questions

Epson RX580 reset FAQ

What if the first reset attempt fails?

Correct the driver or USB communication problem first. If the key was consumed, use the new-key generator or contact support.

Does Epson RX580 need service mode?

No. Epson printers do not use the Canon service-mode sequence. Connect the printer normally by USB.

How long does the reset take?

The reset itself usually finishes in about 1–2 minutes after the printer has been detected correctly.

Reset with confidence

Restore Epson RX580

Complete the Epson RX580 counter reset with Wic Reset Connect and assistance whenever you need it.

Reset key: $8,00
Alışveriş Sepeti
Para biriminizi seçin