Epson R350 Waste Ink Counter Reset

The Epson R350 is a widely used Epson printer. Like many Epson devices, it can stop printing when the internal waste ink counter reaches its predefined limit.

During head cleaning and maintenance cycles, excess ink is routed to internal absorber pads. The Epson R350 uses a software counter to estimate pad saturation and locks printing at a set threshold.

Why Does the Epson R350 Show ‘Service Required’?

Most Epson R350 waste ink counter locks are solved by a software counter reset. Wic Reset Connect provides a straightforward procedure.

Typical Signs

• ‘Service Required’ / service life message in driver or utility
• Maintenance/support code (varies by model/driver)
• Printing stops after cleaning cycles
• Warning repeats after restarting the printer

Reset Epson R350 Waste Ink Counter in 3 Steps

1. Adım 1: Connect Epson R350 to a Windows computer with a stable Internet connection using a USB cable.
2. Adım 2: Start Wic Reset Connect in Administrator mode and wait until Epson R350 appears in the device list.
3. Adım 3: Paste the reset key, click Reset, and after completion power-cycle Epson R350.

Most Epson R350 waste counter resets finish in ~1–2 minutes.

What You Need

• USB connection required (Wi-Fi reset not supported)
• Valid Wic Reset Connect reset key
• Windows 7/8/10/11 PC
• Stable Internet connection during reset