Model-specific reset guide
Epson EP-904F Reset Waste Ink Counter
A waste ink counter warning can prevent Epson EP-904F from printing even when the printer is otherwise working normally. Follow the checks and reset sequence below to restore operation safely.
Why the ink pad counter blocks Epson EP-904F
An ink pad message is a maintenance safeguard. It indicates that Epson EP-904F has reached a stored waste ink value that must be reset before normal printing can resume.
Wic Reset Connect is designed to reset the compatible counter in Epson EP-904F. The physical waste ink system should still be inspected and maintained when necessary.
Reset the counter in Epson EP-904F
Use the sequence below to establish a stable USB connection and clear the waste ink counter.
-
Install the original driver
Install the official Epson driver for EP-904F and confirm that Windows can see the printer.
-
Connect directly by USB
Connect Epson EP-904F to the computer without Wi-Fi, a hub or an adapter.
-
Start Wic Reset Connect
Close Epson Status Monitor, run Wic Reset Connect as Administrator and select Epson EP-904F.
-
Enter the key and reset
Enter the purchased key, choose Reset and keep the printer connected until completion.
If Epson EP-904F is not detected
- Run Wic Reset Connect as Administrator and keep the internet connection active throughout validation.
- Try another USB port and a known data-capable USB cable if the printer is not detected.
- Install the original Epson driver for EP-904F; a generic Windows driver may not expose the required communication interface.
- Close Epson Status Monitor and any other Epson maintenance software before starting Wic Reset Connect.
Epson EP-904F reset FAQ
Can I reset Epson EP-904F over Wi-Fi?
No. Wic Reset Connect requires a direct USB connection to the Windows computer.
Does Epson EP-904F need service mode?
No. Epson printers do not use the Canon service-mode sequence. Connect the printer normally by USB.
How long does the reset take?
The reset itself usually finishes in about 1–2 minutes after the printer has been detected correctly.
Restore Epson EP-904F
Ready to restore Epson EP-904F? Check the requirements once more and start the guided reset.