Epson PX-1700F Waste Ink Counter Reset
If your Epson PX-1700F suddenly refuses to print and shows a maintenance warning, it is often caused by the waste ink (ink pad) counter threshold.
A waste ink counter in the Epson PX-1700F accumulates after cleaning operations. Once it reaches a limit, printing is stopped to prevent overflow.
Why the Epson PX-1700F Stops Printing (Waste Counter Limit)
A service visit is often unnecessary. Wic Reset Connect allows a safe Epson PX-1700F waste counter reset in minutes.
Typical Signs
- ‘Service Required’ / service life message in driver or utility
- Maintenance/support code (varies by model/driver)
- Printing stops after cleaning cycles
- Warning repeats after restarting the printer
Step-by-Step: Epson PX-1700F Waste Counter Reset
- Steg 1: Connect Epson PX-1700F to a Windows computer with a stable Internet connection using a USB cable.
- Steg 2: Start Wic Reset Connect in Administrator mode and wait until Epson PX-1700F appears in the device list.
- Steg 3: Paste the reset key, click Reset, and after completion power-cycle Epson PX-1700F.
Most Epson PX-1700F waste counter resets finish in ~1–2 minutes.
What You Need
- Stable Internet connection during reset
- Windows 7/8/10/11 PC
- USB connection required (Wi-Fi reset not supported)
- Valid Wic Reset Connect reset key
Common Fixes
- Run the app as Administrator.
- Temporarily disable VPN/proxy if validation fails.
- Restart printer and PC, then try again.
- Try another USB cable (some cables are charge-only).
- Use a direct USB connection (avoid hubs).
FAQ
How long does it take?
Usually about 1–2 minutes.
Can I reset over Wi-Fi?
No. The reset requires a USB connection to a Windows PC.
Do I need a service center?
Typically not for a waste ink counter lock; a reset is usually sufficient.
What if reset doesn’t work?
Check USB cable/port, run as admin, and close other printer utilities.
Guide prepared for Epson PX-1700F – Waste Ink Counter Reset using Wic Reset Connect.