Epson XP-333 Waste Ink Counter Reset

Epson XP-333 Waste Ink Counter Reset

If your Epson XP-333 suddenly refuses to print and shows a maintenance warning, it is often caused by the waste ink (ink pad) counter threshold.

A waste ink counter in the Epson XP-333 accumulates after cleaning operations. Once it reaches a limit, printing is stopped to prevent overflow.

Why Does the Epson XP-333 Show ‘Service Required’?

Most Epson XP-333 waste ink counter locks are solved by a software counter reset. Wic Reset Connect provides a straightforward procedure.

Epson XP-333 Ink Pad Counter Reset – Quick Steps

  1. Step 1: Use a Windows PC (7–11) with Internet access. Connect Epson XP-333 via USB (Wi-Fi reset is not supported).
  2. Step 2: Open Wic Reset Connect with admin privileges and verify device recognition for Epson XP-333.
  3. Step 3: Enter your reset key and press Reset. Wait ~1–2 minutes, then restart Epson XP-333.
Buy Reset Key ⬇️ Download Wic Reset Connect Instructions

Most Epson XP-333 waste counter resets finish in ~1–2 minutes.

System Requirements

  • Stable Internet connection during reset
  • USB connection required (Wi-Fi reset not supported)
  • Windows 7/8/10/11 PC
  • Valid Wic Reset Connect reset key

If the Printer Is Not Detected

  • Close Epson Status Monitor or other printer utilities.
  • Run the app as Administrator.
  • Temporarily disable VPN/proxy if validation fails.
  • Restart printer and PC, then try again.
  • Try another USB cable (some cables are charge-only).

FAQ

Do I need a service center?
Typically not for a waste ink counter lock; a reset is usually sufficient.
Can I reset over Wi-Fi?
No. The reset requires a USB connection to a Windows PC.
What if reset doesn’t work?
Check USB cable/port, run as admin, and close other printer utilities.
How long does it take?
Usually about 1–2 minutes.

Guide prepared for Epson XP-333 – Waste Ink Counter Reset using Wic Reset Connect.

Корпа