Fix Epson TX600FW Service Required – Waste Counter Reset

Epson TX600FW Waste Ink Counter Reset

If your Epson TX600FW suddenly refuses to print and shows a maintenance warning, it is often caused by the waste ink (ink pad) counter threshold.

The Epson TX600FW tracks waste ink with an internal counter. Because it is an estimate (not a physical sensor), it may trigger before the pads are actually full.

Understanding the Epson TX600FW Waste Ink Counter

With Wic Reset Connect, you can reset the Epson TX600FW waste ink counter quickly using a Windows PC, USB connection, and a valid reset key.

Epson TX600FW Ink Pad Counter Reset – Quick Steps

  1. Step 1: Use a Windows PC (7–11) with Internet access. Connect Epson TX600FW via USB (Wi-Fi reset is not supported).
  2. Step 2: Run Wic Reset Connect as Administrator and confirm Epson TX600FW is detected.
  3. Step 3: Enter your reset key and press Reset. Wait ~1–2 minutes, then restart Epson TX600FW.
Buy Reset Key ⬇️ Download Wic Reset Connect Instructions

Most Epson TX600FW waste counter resets finish in ~1–2 minutes.

What You Need

  • Windows 7/8/10/11 PC
  • Valid Wic Reset Connect reset key
  • USB connection required (Wi-Fi reset not supported)
  • Stable Internet connection during reset

If the Printer Is Not Detected

  • Temporarily disable VPN/proxy if validation fails.
  • Use a direct USB connection (avoid hubs).
  • Close Epson Status Monitor or other printer utilities.
  • Run the app as Administrator.
  • Try another USB cable (some cables are charge-only).

FAQ

Can I reset over Wi-Fi?
No. The reset requires a USB connection to a Windows PC.
How long does it take?
Usually about 1–2 minutes.
Do I need a service center?
Typically not for a waste ink counter lock; a reset is usually sufficient.
What if reset doesn’t work?
Check USB cable/port, run as admin, and close other printer utilities.

Guide prepared for Epson TX600FW – Waste Ink Counter Reset using Wic Reset Connect.

Корпа