Epson TX600FW Waste Ink Counter Reset

If your Epson TX600FW suddenly refuses to print and shows a maintenance warning, it is often caused by the waste ink (ink pad) counter threshold.

The Epson TX600FW tracks waste ink with an internal counter. Because it is an estimate (not a physical sensor), it may trigger before the pads are actually full.

Understanding the Epson TX600FW Waste Ink Counter

S spletno stranjo Wic Reset Connect, you can reset the Epson TX600FW waste ink counter quickly using a Windows PC, USB connection, and a valid reset key.

Epson TX600FW Ink Pad Counter Reset – Quick Steps

1. 1. korak: Use a Windows PC (7–11) with Internet access. Connect Epson TX600FW via USB (Wi-Fi reset is not supported).
2. 2. korak: Spustite Wic Reset Connect as Administrator and confirm Epson TX600FW is detected.
3. 3. korak: Vnesite ključ za ponastavitev in pritisnite Ponastavitev. Wait ~1–2 minutes, then restart Epson TX600FW.

Most Epson TX600FW waste counter resets finish in ~1–2 minutes.

Kaj potrebujete

• Windows 7/8/10/11 PC
• Veljavna ponastavitev Wic Povežite tipko za ponastavitev
• Zahtevana je povezava USB (ponastavitev Wi-Fi ni podprta)
• Stabilna internetna povezava med ponastavitvijo

Če tiskalnik ni zaznan

• Začasno onemogočite VPN/proxy, če preverjanje ni uspešno.
• Uporabite neposredno povezavo USB (izogibajte se vozliščem).
• Zaprite Epson Status Monitor ali druge pripomočke za tiskalnik.
• Aplikacijo zaženite kot skrbnik.
• Poskusite z drugim kablom USB (nekateri kabli so namenjeni samo polnjenju).

POGOSTA VPRAŠANJA