Fix Epson ET-2816 Service Required – Waste Counter Reset

Epson ET-2816 Waste Ink Counter Reset

When the Epson ET-2816 reaches its maintenance threshold, Epson firmware may block printing as a safeguard. In most cases, this is resolved with a counter reset.

A waste ink counter in the Epson ET-2816 accumulates after cleaning operations. Once it reaches a limit, printing is stopped to prevent overflow.

Why Does the Epson ET-2816 Show ‘Service Required’?

A service visit is often unnecessary. Wic Reset Connect allows a safe Epson ET-2816 waste counter reset in minutes.

Reset Epson ET-2816 Waste Ink Counter in 3 Steps

  1. Step 1: Prepare a Windows PC + USB cable and connect Epson ET-2816 directly. Keep Internet enabled for validation.
  2. Step 2: Start Wic Reset Connect in Administrator mode and wait until Epson ET-2816 appears in the device list.
  3. Step 3: Paste the reset key, click Reset, and after completion power-cycle Epson ET-2816.
Buy Reset Key ⬇️ Download Wic Reset Connect Instructions

Most Epson ET-2816 waste counter resets finish in ~1–2 minutes.

Common Fixes

  • Try another USB cable (some cables are charge-only).
  • Use a direct USB connection (avoid hubs).
  • Restart printer and PC, then try again.
  • Temporarily disable VPN/proxy if validation fails.
  • Close Epson Status Monitor or other printer utilities.

Frequently Asked Questions

What if reset doesn’t work?
Check USB cable/port, run as admin, and close other printer utilities.
Can I reset over Wi-Fi?
No. The reset requires a USB connection to a Windows PC.
Do I need a service center?
Typically not for a waste ink counter lock; a reset is usually sufficient.
How long does it take?
Usually about 1–2 minutes.

Guide prepared for Epson ET-2816 – Waste Ink Counter Reset using Wic Reset Connect.

Корпа