Epson CX4080 Waste Ink Counter Reset

Epson CX4080 Waste Ink Counter Reset

If your Epson CX4080 suddenly refuses to print and shows a maintenance warning, it is often caused by the waste ink (ink pad) counter threshold.

During head cleaning and maintenance cycles, excess ink is routed to internal absorber pads. The Epson CX4080 uses a software counter to estimate pad saturation and locks printing at a set threshold.

Why the Epson CX4080 Stops Printing (Waste Counter Limit)

A service visit is often unnecessary. Wic Reset Connect allows a safe Epson CX4080 waste counter reset in minutes.

Step-by-Step: Epson CX4080 Waste Counter Reset

  1. Step 1: Prepare a Windows PC + USB cable and connect Epson CX4080 directly. Keep Internet enabled for validation.
  2. Step 2: Open Wic Reset Connect with admin privileges and verify device recognition for Epson CX4080.
  3. Step 3: Enter your reset key and press Reset. Wait ~1–2 minutes, then restart Epson CX4080.
Buy Reset Key ⬇️ Download Wic Reset Connect Instructions

Most Epson CX4080 waste counter resets finish in ~1–2 minutes.

What You Need

  • Windows 7/8/10/11 PC
  • USB connection required (Wi-Fi reset not supported)
  • Stable Internet connection during reset
  • Valid Wic Reset Connect reset key

If the Printer Is Not Detected

  • Temporarily disable VPN/proxy if validation fails.
  • Restart printer and PC, then try again.
  • Close Epson Status Monitor or other printer utilities.
  • Try another USB cable (some cables are charge-only).
  • Run the app as Administrator.

FAQ

What if reset doesn’t work?
Check USB cable/port, run as admin, and close other printer utilities.
Can I reset over Wi-Fi?
No. The reset requires a USB connection to a Windows PC.
Do I need a service center?
Typically not for a waste ink counter lock; a reset is usually sufficient.
How long does it take?
Usually about 1–2 minutes.

Guide prepared for Epson CX4080 – Waste Ink Counter Reset using Wic Reset Connect.

Корпа