Epson C79 Waste Ink Counter Reset

When the Epson C79 reaches its maintenance threshold, Epson firmware may block printing as a safeguard. In most cases, this is resolved with a counter reset.

During head cleaning and maintenance cycles, excess ink is routed to internal absorber pads. The Epson C79 uses a software counter to estimate pad saturation and locks printing at a set threshold.

Understanding the Epson C79 Waste Ink Counter

With Wic Reset Connect, you can reset the Epson C79 waste ink counter quickly using a Windows PC, USB connection, and a valid reset key.

Common Symptoms

• Printer refuses to print even with ink available
• Epson Status Monitor shows maintenance warning
• Blinking lights and blocked jobs
• Device is locked until reset is performed

Three Steps to Restore Epson C79 Printing

1. Step 1: Use a Windows PC (7–11) with Internet access. Connect Epson C79 via USB (Wi-Fi reset is not supported).
2. Step 2: Start Wic Reset Connect in Administrator mode and wait until Epson C79 appears in the device list.
3. Step 3: Use the key to reset the counter, wait for completion, then restart Epson C79 to finalize.

Most Epson C79 waste counter resets finish in ~1–2 minutes.

Before You Begin

• Windows 7/8/10/11 PC
• USB connection required (Wi-Fi reset not supported)
• Valid Wic Reset Connect reset key
• Stable Internet connection during reset

If the Printer Is Not Detected

• Run the app as Administrator.
• Restart printer and PC, then try again.
• Close Epson Status Monitor or other printer utilities.
• Temporarily disable VPN/proxy if validation fails.
• Use a direct USB connection (avoid hubs).

Frequently Asked Questions