Epson C79 Waste Ink Counter Reset

When the Epson C79 reaches its maintenance threshold, Epson firmware may block printing as a safeguard. In most cases, this is resolved with a counter reset.

During head cleaning and maintenance cycles, excess ink is routed to internal absorber pads. The Epson C79 uses a software counter to estimate pad saturation and locks printing at a set threshold.

Understanding the Epson C79 Waste Ink Counter

Dengan Wic Reset Connect, you can reset the Epson C79 waste ink counter quickly using a Windows PC, USB connection, and a valid reset key.

Gejala Umum

• Printer menolak untuk mencetak meskipun tinta tersedia
• Monitor Status Epson menunjukkan peringatan pemeliharaan
• Lampu berkedip dan pekerjaan terhalang
• Perangkat terkunci hingga pengaturan ulang dilakukan

Three Steps to Restore Epson C79 Printing

1. Langkah 1: Use a Windows PC (7–11) with Internet access. Connect Epson C79 via USB (Wi-Fi reset is not supported).
2. Langkah 2: Mulai Wic Reset Connect in Administrator mode and wait until Epson C79 appears in the device list.
3. Langkah 3: Use the key to reset the counter, wait for completion, then restart Epson C79 to finalize.

Most Epson C79 waste counter resets finish in ~1–2 minutes.

Sebelum Anda Mulai

• Windows 7/8/10/11 PC
• Diperlukan koneksi USB (pengaturan ulang Wi-Fi tidak didukung)
• Tombol reset Wic Reset yang valid Hubungkan tombol reset
• Koneksi Internet stabil selama pengaturan ulang

Jika Printer Tidak Terdeteksi

• Jalankan aplikasi sebagai Administrator.
• Hidupkan ulang printer dan PC, kemudian coba lagi.
• Tutup Epson Status Monitor atau utilitas printer lainnya.
• Nonaktifkan VPN/proxy untuk sementara waktu jika validasi gagal.
• Gunakan koneksi USB langsung (hindari hub).

Pertanyaan yang Sering Diajukan