Model-specific reset guide
Ponastavitev števca odpadnega črnila pri Epson XP-313
If your Epson XP-313 has stopped with an ink pad or service-life warning, the printer may have reached its waste ink counter limit. This model-specific guide explains what the message means and how to complete the reset with Wic Reset Connect.
Before resetting Epson XP-313
The printer protects against possible ink overflow by monitoring an internal service counter. On Epson XP-313, reaching the threshold can trigger an ink pad warning and block further jobs.
Wic Reset Connect is designed to reset the compatible counter in Epson XP-313. The physical waste ink system should still be inspected and maintained when necessary.
Reset the counter in Epson XP-313
Correct preparation protects the reset key from being used during a failed communication attempt. Verify each requirement before selecting Reset.
-
Install the original driver
Install the official Epson driver for XP-313 and confirm that Windows can see the printer.
-
Connect directly by USB
Connect Epson XP-313 to the computer without Wi-Fi, a hub or an adapter.
-
Start Wic Reset Connect
Close Epson Status Monitor, run Wic Reset Connect as Administrator and select Epson XP-313.
-
Enter the key and reset
Enter the purchased key, choose Reset and keep the printer connected until completion.
If Epson XP-313 is not detected
- Connect the printer directly to the computer. Do not use Wi-Fi, a USB hub, docking station or print server.
- Clear paused print jobs and restart both the printer and Windows if another program is holding the USB connection.
- Install the original Epson driver for XP-313; a generic Windows driver may not expose the required communication interface.
- Try another USB port and a known data-capable USB cable if the printer is not detected.
Epson XP-313 reset FAQ
What if the first reset attempt fails?
Correct the driver or USB communication problem first. If the key was consumed, use the new-key generator or contact support.
Can I reset Epson XP-313 over Wi-Fi?
No. Wic Reset Connect requires a direct USB connection to the Windows computer.
Does Epson XP-313 need service mode?
No. Epson printers do not use the Canon service-mode sequence. Connect the printer normally by USB.
Restore Epson XP-313
Ready to restore Epson XP-313? Check the requirements once more and start the guided reset.